Solar control panel

image-0-02-04-35792bde5c906f0b7e734ec0666ce4bba2a03de1210298fd62d078675e8da100-V

Machine equipment

1. ReachBox card with all standard features (monitoring, remote configuration, reprogramming);

2. Reader of bonus cards / keys;

3. START, STOP, +, - buttons, inside there are START and STOP buttons;

4. Display;

5. Digital scoreboard;

6. Cashcode bill validator

image-0-02-04-35792bde5c906f0b7e734ec0666ce4bba2a03de1210298fd62d078675e8da100n,jjn-V

Work principle

Dealing with money

- Insert the required sum of money (no more than the maximum time of the glow of the lamps) - the number of minutes will be displayed;

- After the money is inserted, the time for preparation is immediately completed (each insert of a bill updates the time);

- The "-" button will light up;

- When the "-" button is pressed, the number of minutes will be reduced, the "+" button will be highlighted, which will increase  minutes (the rest of the money will be lost when START is pressed);

- When you press the START button or when the set preparation time  is over, the solarium lamps and fans are started; time is also deduced (large and small displays - direct counting of time); the STOP button is active;

When STOP is pressed, the lamps are switched off, on the screen we can see ‘Pause’, the ventilation is running, the time continues to count;

- When the time expires, the machine enters the ventilation mode, "Service is not available";

- When the ventilation is completed, the machine enters the "Ready to go" mode.

3643

Dealing with cards

Insert a bonus card / key;
- If the balance on the card / key is positive, then START and "+" buttons are highlighted and  bill validation is allowed;
- If there is no money on the card / keys, then only the bill validator lights and is ready to receive funds. To replenish the card / key you must first insert a card / key into the card reader, and then insert money in the bill validator;
- Pressing "+" shows the tanning time on the display, then "+" / "-" adds / subtracts 1 min, respectively;
- START decomposes the selected amount from the key and starts the countdown;
- When you press the START button or when the set preparation time is over, the solarium lamps and fans are started; time is also deduced (large and small displays - direct counting of time); the  STOP button is active;
- When STOP is pressed, the lamps are turned off, on the screen we see ‘Pause’, the ventilation is running, the time continues to count. If you insert the card / key from which the funds were debited in the "Pause" mode - the STOP button will be highlighted, the click of which will allow returning the balance on the key;
- After the time is over the machine enters the ventilation mode - "Service is not available";
- When the ventilation is completed, the machine enters the initial mode - "Ready to work".
image-0-02-04-35792bde5c906f0b7e734ec0666ce4bba2a03de1210298fd62d078675e8da100n,jjn-V

Parameters to be given:

- Work permit;
- Maximum tanning time, sec;
- Average tanning time, sec;
- Minimum tanning time, sec;
- Multiplicity of calculation, kopecks,
- Price for1 minute, kopecks
- Lamps cooling time, sec;
- Preparation time, sec.